Belt alignment tool FAQS

QWhat's the application scope of bearing heater?

AThe bearing heater is applicable to the mechanical manufacturing and maintenance of power plants, textile mills, papermaking, chemical industry, petroleum, machinery, mining machinery, wind power industry and other fields. It can be used as the heating and automatic demagnetization of circular workpieces such as bearings, connectors, gears, machinery bushings, etc., so as to make the workpiece cylindrical bulge and realize the requirements of interference assembly. Now the heater is controlled by microcomputer. It can make heater automatically detect equipment failure, automatically adjust heater power, soft start / stop.

QWhat's the features of bearing heater?

A1 .Fast heating speed, temperature display can control the heating process. 2. The new eddy current induction design adopts the international advanced "fuzzy control" and "natural networktechnology". 3. Continuous operation, high output power and high efficiency 4. No open fire, pollution, environmental protection and accident potential. 5. Heated sealed bearing (ZZ, 2RS) 6. Rotary (hydraulic) rocker type or hinge type heating rod design, more convenient to use. 7. Heating time can be displayed during the heating process

QWhat is the oil injectors classification?

A(1) Needle type electromagnetic injector (2) Ball valve type electromagnetic injector (3) Solenoid injector (4) Fuel injector for lower oil inlet

QWhat's the bearing puller?

AThe bearing puller is a device for taking out the inner bearing from the bearing seat, which is a kind of inner bearing puller, including mounting plate, tension bolt and through bolt; there are not less than two tension bolts, the bottom of each tension bolt has a claw which can catch the bottom of the inner bearing, each tension bolt is installed with a fastening nut, and the middle of the mounting plate has not less than one long hole The width of the long hole is larger than the diameter of the tension bolt. The lower end of each tension bolt passes through the long hole and extends to the lower part of the mounting plate. The fastening nut can be stuck on the mounting plate at the long hole. At least two positioning nuts are fixed on the mounting plate outside the long hole.